Table of contents

Accept a Google Ads recommendation only when it fixes a fault or helps you win jobs at a cost per enquiry you can afford. The optimisation score is Google's estimate of how well the account is set to perform, and it does not measure profit. Repairs and housekeeping are usually safe, changes to bids, keywords and assets deserve a test, and anything that widens your reach or raises your budget needs proof first.
What is the Google Ads optimisation score?
The optimisation score is a percentage on the Recommendations page that rates your setup against Google's own list of suggestions. Google's help page on optimisation score, checked on 21 November 2026, says "Optimisation score is an estimate of how well your Google Ads account is set to perform." Scores run from 0 to 100%, and 100% means the account can perform at its full potential.
Every recommendation shows a score uplift, the rise in the score if you apply it. Google's page on checking your score says each one shows "a score uplift, which indicates the possible score improvement from following the recommendation."
The score follows the goal Google infers from your bid strategy. Our guide to Google Ads bidding strategies covers which suit a small account.
What does the score not measure?
It does not measure profit, job value or whether the enquiries are the right ones. Google's page on recommendations says the page does not claim to "predict whether your ads will do well".
Here is a made-up example. Ellie runs a three-person domestic cleaning firm in York. Her score sits at 62%, and over a few weeks she applies every recommendation until it reaches 94%. The changes add broader keywords and turn on partner sites. Her spend rises, her enquiries stay about level, and several come from people outside her patch.
The score has no field for what a cleaning contract is worth to Ellie. Work that out first with the client value calculator, and treat the score as a to-do list from Google.
Which recommendations should a local firm accept?
Accept the repairs and the housekeeping. This sorting is our advice for a small local Search account, not Google's. The type names are the ones on Google's page on types of recommendations, and you will see only some of them.
- "Fix your ad text" and "Fix your ad destinations". Disapproved ads do not run. Fix these first.
- "Fix your conversion tracking". Broken tracking starves your bidding of data. Our conversion tracking guide shows how to count calls and forms.
- "Remove conflicting negative keywords". Google says your ads may not serve because of these. Check the list first, in case you added a negative on purpose.
- "Remove non-serving keywords". Google's reason is that they have had no traffic for a year or more. Removing them costs nothing.
Which recommendations should you test first?
Test anything that changes who sees your ads or how bids behave. Google gives you a way to do it. Its page on applying recommendations says "Select Save as experiment to find the impact of a recommendation before applying it to your entire campaign." It says this lets you test bid or budget recommendations against your original setup.
Our advice is to test these types before you apply them:
- Keywords. "Add new keywords" may find real searches and may add loosely related ones. Check each against the services you sell and the places you cover.
- Bidding changes. "Set a target CPA" and "Bid more efficiently with Maximise conversions" move how the account spends. They need tracking you trust and enough conversions to learn from.
- Assets. "Add call assets to your ads" and "Add callouts to your ads" suit a firm that wants calls. Write them yourself, so the wording matches your offer.
Change one thing at a time. Google's page says other changes and seasonality also affect your numbers.
Which recommendations should a small account usually dismiss?
Dismiss anything that spends more or spreads wider without evidence it brings profitable jobs. This is our advice, not Google's.
- "Add broad match keywords". Without Smart Bidding and solid conversion data, broad match tends to bring in searches you did not choose. Our match types guide explains how each type behaves.
- "Expand your reach with Google search partners". Your ads run on partner sites outside Google Search, where a small account has little room to check what the clicks were worth.
- "Use Display Expansion". It spends unspent Search budget on the Display Network, where people are not searching for a cleaner or a roofer.
- "Raise your budgets". Raise a budget only when your cost per enquiry is under target and you are losing impressions to budget. The recommendation knows neither fact.
- Create a Performance Max campaign. It works poorly at low volume, so start on Search and read our Performance Max guide first.
Dismissing is safe to repeat. Google's page says "Dismissed recommendations can surface again after a preset amount of time", and you can dismiss the card again.
Should you turn on auto-apply?
Keep auto-apply off. When it is on, Google applies the types you choose on a regular basis without waiting for you to read each one. Google's page says "You can only apply recommendations automatically on the account level", so you cannot switch it on for one campaign and leave another alone.
The types it can apply include "Add broad match keywords", "Expand your reach with Google search partners" and "Use Display Expansion", the three we would dismiss. It also includes bid changes such as "Set a target CPA". Google notes "Auto-applying recommendations won't increase your budget", so you still review budget yourself. From 26 January 2026, Google says, "Add responsive search ads" no longer applies new responsive search ads automatically.
A one-click "Apply" can change ads and keywords you did not write. As a general warning, an applied change can add keywords, adjust bids or edit ads, and a busy owner may never read it. Keep the account in your own name and the wording in your own hands, so you can tell what Google changed.
How do you undo a recommendation?
Use the Change history page. Google's page says "If you apply a recommendation in error, you can undo it on the 'Change history' page within 30 days." Google adds that partial application of recommendations cannot be undone.
To check auto-apply is off, open the Recommendations page and look at the auto-apply settings in the top bar. Google says you can turn the feature on or off at any time there. If you dismissed a card by mistake, select the Dismissed bubble, open the card's 3-dot menu and choose Undismiss all.
Common questions
Is a 100% optimisation score good?
Not by itself. Google's page says an account "can reach an optimisation score of 100% by applying or dismissing all recommendations." The number says little about profit. A cost per enquiry under your target tells you more. A lower score with profitable enquiries beats a high score with expensive ones.
Do Google Ads recommendations cost money?
They are free to see and apply, but some change how much you spend, such as wider keywords and budget increases. Check the effect on spend before you accept. Auto-apply will not raise your budget, though wider targeting can use the budget you have faster.
Does dismissing recommendations hurt my account?
Google's help pages do not say it does. Dismiss anything that does not match your goals.
How do I turn off auto-apply recommendations?
Open the Recommendations page, go to the auto-apply settings in the top bar and clear the types you do not want applied. Google says you can turn the feature on or off at any time by updating those settings.
What to do this week
Open the Recommendations page and note your score. Sort each card into accept, test or dismiss, and fix repairs first. Open the auto-apply settings to confirm nothing is selected, then check Change history for anything applied in the last 30 days that you did not choose. Read our guide to Google Ads reporting for the numbers to watch, and write down your target cost per enquiry. The full routine is in our guide to optimising Google Ads. Get a second view with the free Google Ads audit.


