Skip to content
SEO Pages

Google Ads optimisation: how to run a profitable account

Written by

Personally reviewed

Founder, SEO Pages

Google Ads optimisation for a local firm means judging every change on jobs won and profit made. The fixes in a set order, and how long to wait before judging one.

Published

Add SEO Pages as a preferred source on Google
Table of contents
A control dial turned towards a rising line chart.

Google Ads optimisation for a local firm means judging every change on the jobs it wins and the profit it leaves, not on clicks or "conversions". Fix the account in a set order: count the right things, stop paying for searches that never become jobs, choose a bid strategy that fits your data, improve the ad and page, then decide where the next pound goes. Make one change at a time and wait before judging it. If you are new to the platform, start with our guide to Google Ads for small businesses.

What does a profitable Google Ads account look like?

A profitable account wins jobs at a cost per enquiry that sits well below what each job earns you. Three numbers tell you whether yours does, and all three come from your own records, not from Google Ads:

  1. Cost per enquiry. What you spend on ads divided by the calls and forms you receive.
  2. The share of enquiries that become jobs. Out of every ten enquiries, how many you quote for and win.
  3. The profit on a job. What you keep after materials, wages and fuel, not the invoice total.

Here is a made-up example. Dan runs a roofing firm in Maidstone. A typical repair is worth twelve hundred pounds, and he keeps 30% of it: three hundred and sixty pounds profit. He wins 1 enquiry in 4. That means each enquiry is worth ninety pounds to him on average, because three hundred and sixty pounds divided by four is ninety pounds.

Ninety pounds is his break-even cost per enquiry. Pay more than that and the ads lose money. Our method in the client value calculator spends no more than a third of the profit on winning the work, which leaves two thirds with the firm. A third of Dan's profit is one hundred and twenty pounds a job, and across 4 enquiries that is thirty pounds. Thirty pounds is his target cost per enquiry.

Now a firm where the client pays for years. Say Nadia runs a small accountancy practice in Croydon. A client pays her one hundred pounds a month for 5 years and half of that is profit. Over 5 years the client pays six thousand pounds and Nadia keeps three thousand. She wins 1 enquiry in 3. A third of the profit is one thousand pounds per client, so she can afford about three hundred and thirty-three pounds per enquiry. Nobody can name a "good" cost per enquiry without knowing what a client is worth.

The same sum can be written as a return on ad spend. Our guide on what ROAS is shows how to turn your margin into a break-even ROAS and a target. If you want the cost-side version, our post on cost per acquisition covers it. If you have not yet launched and want to know whether the sum works at all, read are Google Ads worth it first.

Everything else in this guide serves one aim: lower the cost per enquiry, raise the share of enquiries you win, or both, until the gap between cost and profit is wide enough to keep.

Why must you fix measurement before anything else?

Every later fix relies on the account knowing which clicks led to calls and forms. If it counts the wrong things, you will optimise the wrong things, and Google's automated bidding will chase them for you.

Check four things.

Calls are counted. For most local firms the phone is the main route. If the account counts form fills but not calls, it undercounts your best traffic and may pull spend away from the searches that make the phone ring. Our guide to call tracking for small businesses explains the options.

Junk is kept out. Spam forms and wrong-number calls counted as conversions teach the bidding to find more of them. Our guide to spam enquiries and click fraud covers how to filter them.

Forms are counted once. A thank-you page that reloads, or a tag that fires on every page view, inflates the number. Our post on Google Ads conversion tracking shows how to test that each call and form is counted once.

You know which enquiries became jobs. This is the step most firms skip. A call from someone asking for a service you do not offer is counted the same as a booked job. Keep a simple log of every enquiry for a few weeks with a column for "won", and compare it with what the account reports. If the numbers are far apart, the account is rewarding the wrong searches.

Then check which conversion actions are primary and which are secondary. Google's help page on primary and secondary conversion actions, checked on 21 November 2026, says secondary actions "are for observation only". They show up in the "All conversions" column but are not used for bidding. Primary actions are the ones bidding aims at. Page views, scrolls and clicks on a map link belong in secondary. Calls of a useful length and completed enquiry forms belong in primary. The same page warns that misconfiguring this "can prevent Smart Bidding from optimising effectively".

Do not move on until you trust the count.

How do you stop paying for searches that never become jobs?

Look at the search terms report every week and add negative keywords for any search that could not become a job. The search terms report shows the actual phrases people typed before they saw and clicked your ad. These are often different from the keywords you bid on.

Sort the report by cost, with the most expensive terms first. For each one, ask a single question: would I be glad to take this call? Searches for jobs, free advice, training courses, vacancies, DIY and cheaper trades you do not offer are common leaks for local firms. Add each as a negative keyword so the ad stops showing for it.

Two habits keep this useful. First, add negatives at the right level: a term that is wrong for every campaign goes on the account-wide list, and a term that is wrong only for one service goes on that campaign. Second, do not block a term only because it has not converted yet. A search with a handful of clicks may need more time. Block it at once only if the meaning is wrong.

Our guide to Google Ads negative keywords covers match types for negatives, how to build lists, and how to avoid blocking searches you want.

Which match types suit a small budget?

Start with exact and phrase match, and use broad match only when you have Smart Bidding and solid conversion data. Exact match keeps the ads close to the searches you named. Phrase match lets in a little more variation around the words you chose. Both give you control over where a small budget goes, and the search terms report from the previous section tells you whether the control is working.

Broad match lets Google show your ad on searches it judges related to your keyword, which can reach buyers you did not think of and can waste money on the wrong ones. Google's help page on keyword matching options, checked on 21 November 2026, says "Smart Bidding works best with broad match because the wide set of searches allows it to learn what works best for you." That sentence tells you what broad match needs: an automated bidding strategy that has data to learn from. A small account with a handful of enquiries a week has little to learn from, so keep it tight. Our guide on how to set up Google Ads covers building the first keyword list, and our guide to Google Ads match types covers each type and when a broad match test is worth running.

Which bid strategy matches how much data you have?

Choose the bid strategy by how many enquiries the account records, and move up only as the data builds. The ladder has four steps.

Little or no data: Maximise clicks. A new account has no history of calls or forms for Google to learn from. Google's help page on why you may not see your ad, checked on 21 November 2026, says "For new campaigns or campaigns with limited data, 'Maximise clicks' might be a better starting point than 'Maximise conversions' or 'Target CPA/ROAS'." Set a cap on the most you will pay for a click so a competitive search cannot drain the day's budget on a few visits.

Enquiries arriving steadily: Maximise conversions. Once the account records a steady flow of counted calls and forms, switch to Maximise conversions, which spends the budget to win as many of them as it can. This is where the measurement work pays off, because the strategy aims at whatever the account counts.

Enough history to name a price: Target CPA. Target CPA asks Google to aim for an average cost per enquiry that you set. Use the target cost per enquiry you worked out in the first section, not a number that feels comfortable. Google's help page on Target CPA, checked on 21 November 2026, says "For evaluation, we recommend that you measure performance for the last 30 days, including at least 30 conversions." If you have fewer than that, you are judging the strategy on too little evidence.

Job values uploaded: value-based bidding. If you record which enquiries became jobs and what they were worth, you can feed that back to Google and bid on value, not on a count of enquiries. A boiler install and a small repair are not worth the same, and counting them equally pushes spend towards whichever is easier to get. It suits firms with a mix of job sizes and an enquiry log they trust.

Performance Max sits outside this ladder. It works poorly at low volume, so a local firm should start on Search and consider it only once enquiries arrive at volume. Our post on Performance Max for local businesses explains why. For each strategy in more detail, and when to move between them, see our guide to Google Ads bidding strategies.

What does Google say about learning?

Smart Bidding goes through a learning period after some changes. Google's help page on Smart Bidding learning, checked on 21 November 2026, says "The 'Learning' status will show when you make major structural changes." The same page says "Updates to budgets, ROI targets or targeting settings take effect in the next auction but never trigger a 'Learning' status."

The same page still advises restraint: "Avoid making multiple target changes within a single conversion cycle unless there is a clear business need." So change targets rarely and in small steps. Move a target by a modest amount, then wait. Changing the structure of a campaign, such as the bid strategy or the conversion actions it uses, is the kind of edit that triggers the status, so treat those as events and not as routine tweaks.

How do you improve the ad and the page it lands on?

Test one change at a time on the ad, and fix the page when the clicks are right but the enquiries are not. These are the two places where the cost per enquiry falls without paying Google any more.

For the ad, write headlines that match what the person typed and say what you do, where you do it and one reason to call. Our guide to Google Ads Quality Score explains how relevance affects what you pay, so the detail does not need repeating here.

To test properly, use an experiment instead of editing the live ad and guessing. Google's help page on custom experiments, checked on 21 November 2026, says "Making changes to either your original campaign or experiment while your experiment is running may make it harder to interpret your results." The practical rule is to change one thing, leave both versions alone, and read the result when the wait is over. If you edit the headline, the landing page and the target on the same day, you cannot know which one helped.

For the page, look at what a person sees on a phone in the first few seconds. The phone number should be visible and tappable. The headline should repeat the service they searched for. A form should ask for as little as it can. Our landing page optimisation service covers this if you want help.

The page also sets your share of enquiries won. Answering calls quickly and quoting within a day lifts the second of the three numbers, and nothing in the account can do that for you.

Where should the next pound go?

Put the next pound into budget only when the account is losing impressions to budget, and into ads and pages when it is losing them to rank. Google reports both losses, and the difference tells you which lever to pull.

Google's help page on getting impression share data, checked on 21 November 2026, defines them like this. "Search lost IS (budget)" is "The percentage of time that your ads weren't shown on the Search Network due to insufficient budget." "search lost IS (rank)" is "The percentage of time that your ads weren't shown on the Search Network due to poor Ad Rank in the auction."

Read them together for each campaign:

  • High lost to budget, low lost to rank, and the cost per enquiry is under target. The account is winning auctions and running out of money. Raise the budget in steps and watch the cost per enquiry as you go. This is the only case where more money reliably buys more enquiries at a price you can afford.
  • High lost to rank. The ads are being outbid or judged less relevant than rivals. More budget does not fix that, because the ads still lose the auction. Work on the ad, the keywords and the page first.
  • Both low. The account is showing for nearly every search it is eligible for. Growth now comes from adding new services or areas, not from pushing harder on the same ones.

A campaign that costs more than your target per enquiry should not get more money. Budget is the last lever because it multiplies whatever the account already does, good or bad. Our guide to Google Ads reporting covers where to find these columns and how to read them alongside the rest of a monthly report.

What should a weekly and monthly routine look like?

A short, fixed routine beats occasional bursts of tinkering. Here is one that fits an hour or two.

Every week:

  • Read the search terms report and add negative keywords for any search that could not become a job.
  • Check that calls and forms are still being counted, and look at the last few days for a sudden drop that points to a broken tag.
  • Compare the enquiries Google reports with your own log. Note which ones became jobs.

Every month:

  • Work out the cost per enquiry and the cost per job, using your own log for jobs won.
  • Compare both with the targets from the first section.
  • Read lost impression share for budget and rank on each campaign.
  • Decide on one change for the coming month: a new ad test, a page fix, a small move in the target, or a budget step.
  • Write down what you changed and the date, so the next review knows what to credit.

How long should you wait before judging a change?

Wait for the time Google gives, and do not read results from the first few days. Google's help page on Smart Bidding learning, checked on 21 November 2026, says "evaluate performance over two conversion cycles or a two-week window (whichever is longer), accounting for conversion delay." Resist undoing a change after two quiet days. The same page says "User behaviour varies, but Smart Bidding should aim to hit the target over a week or longer." A single bad Tuesday proves little.

Which of Google's recommendations should you accept?

Review each recommendation and accept only the ones that serve your jobs and profit. Google's help page on optimisation score, checked on 21 November 2026, says "Optimisation score is an estimate of how well your Google Ads account is set to perform." It does not know what a job is worth to you or whether the enquiries are the kind you want. Some recommendations help, such as fixing a disapproved ad or adding a missing call asset. Others push towards broader targeting and bigger budgets, which spend more without proof of profit. Do not turn on auto-apply, which lets Google change the account without asking. A score of 100% with a cost per enquiry above your target is a poor account, and a score of 70% with a cost per enquiry under target is a good one. Our guide to Google Ads recommendations sorts the common ones into accept, test first and dismiss.

What if the ads still bring no enquiries?

Work backwards through the same order: check that the tracking works, the search terms are relevant, the ads are showing, and the page makes the next step obvious. If clicks arrive but nobody calls, the page or the offer is the likely cause. If the ads barely show, look at the budget, the bids and any disapprovals. Our guide on Google Ads not getting enquiries goes through each cause with the checks to run.

Common questions

How often should I optimise my Google Ads?

Check the search terms and the tracking every week, and make one planned change a month. Planned changes need room to be judged, so stacking several at once makes the result unreadable. Google's advice to evaluate over two conversion cycles or a two-week window, whichever is longer, sets the lower limit on how soon you can judge a change.

How do I lower my cost per click without losing enquiries?

Raise the share of clicks that come from searches you want, and the average price tends to follow. Add negative keywords for searches that never become jobs, tighten match types, and improve ad relevance and the page. Cutting bids across the board lowers the price per click but also lowers the number of enquiries, and cost per enquiry is the number that matters. A cheaper click that never calls costs more than a dearer one that does.

How long before Google Ads become profitable?

It depends on how fast the account collects enquiries, because you cannot judge it before it has enough. Google recommends measuring Target CPA over the last 30 days with at least 30 conversions, and a small local account may take longer than that to reach it. Profit also depends on the sums in the first section: if the cost per enquiry cannot fall below what each enquiry is worth, no amount of tuning will make it pay.

Should I use manual or automated bidding?

Start with Maximise clicks and a cap, and move to automated bidding aimed at conversions once enquiries arrive and the tracking is trusted. Automated bidding follows whatever the account counts, so it only helps when the count is right.

What to do this week

Work out your three numbers: the profit on a typical job, the share of enquiries you win, and the most you can pay for an enquiry. Then check that calls and forms are counted once each, open the search terms report and add negatives for every search you would not want a call from, and note the date in a log before you change anything else. Run our free Google Ads audit to see where an account stands against this order, and use the client value calculator to set your target cost per enquiry. If you would rather hand the work to someone who judges every change this way, see how we run Google Ads for local firms. The account should always sit in your own business name, whoever runs it.