Skip to content
SEO Pages

What is ROAS? Meaning, formula and how to calculate it

Written by

Personally reviewed

Founder, SEO Pages

ROAS meaning: return on ad spend divides the revenue your ads bring in by what you spend on them. The formula, a service-firm example and break-even ROAS.

Published

Add SEO Pages as a preferred source on Google
Table of contents
A balance scale with stacks of plain coins on each pan.

Return on ad spend (ROAS) is the revenue your ads bring in for every pound you spend on them. You work it out by dividing the revenue from the ads by the ad spend, so one thousand pounds of ads that brings in four thousand pounds of work has a ROAS of 4, or 400%. ROAS counts revenue before costs, so a service firm needs to know its margin before it can say whether a given ROAS makes money.

What does ROAS mean?

ROAS stands for return on ad spend. It answers one question: for each pound you put into ads, how many pounds of revenue came back? A ROAS of 1 means one pound back for each pound spent. A ROAS of 4 means four pounds back.

The figure says nothing about what the work cost you. A job worth two thousand pounds counts as two thousand pounds of revenue whether materials and wages left you with one thousand pounds or two hundred. That gap is why ROAS alone cannot tell you whether ads make money.

How do you calculate ROAS?

Divide the revenue your ads brought in by the amount you spent on them:

ROAS = revenue from ads ÷ ad spend

As a ratio the answer is a plain number. As a percentage you multiply it by 100. Both describe the same result, and you will see both.

Here is a made-up example. Say Priya runs a commercial cleaning firm in Reading. She spends one thousand pounds on Google Ads and wins five contracts, each worth one thousand six hundred pounds. That is eight thousand pounds of revenue. Eight thousand divided by one thousand gives a ROAS of 8, or 800%.

Three habits keep the figure honest:

  1. Count revenue from the ads only. Leave out referrals, repeat customers and work from your own website.
  2. Match the period. A job that closes in March from an enquiry in January belongs to January's spend.
  3. Use the spend you paid Google. Management fees and the cost of a landing page are separate costs you can add later.

How do you work out ROAS when you sell services, not products?

Give every conversion a value. A shop has a price on each sale, so its ROAS comes straight from the till. A service firm gets an enquiry, and an enquiry has no price. Until you decide what an enquiry or a job is worth, Google Ads has no revenue figure to divide.

There are two ways to set the value.

Use an average job value. Take the typical invoice for the work you advertise and give each conversion that value. It is easy to set up and a sensible place to start. It treats a small job and a large job as equal.

Upload the jobs you won, with their value. When a job closes, you send Google the real invoice amount for the enquiry behind it. This takes more work and is more accurate. Google's help page on conversion values, checked on 21 November 2026, says "if you offer different services at different price points, you should use different values for each conversion." The same page says "Conversion values help you measure and optimise the true business impact of your ad campaigns more accurately."

Either way, the values rest on your conversion tracking. If calls and forms are not counted, there is nothing to attach a value to. Our guide to Google Ads conversion tracking covers how to count them.

What is the difference between ROAS and ROI?

ROAS compares revenue with ad spend. Return on investment (ROI) compares profit with ad spend: the profit on the work, minus the ad spend, divided by the ad spend, as a percentage.

Say Karen runs a kitchen fitting firm in Leeds. She spends three thousand pounds on ads and wins nine thousand pounds of work. After materials, fitters and fuel she keeps 30% of each job.

MeasureWorkingResult
ROAS9,000 ÷ 3,0003 (300%)
Profit on the work30% of nine thousand poundsTwo thousand seven hundred pounds
Result after ad spend2,700 minus 3,000A loss of three hundred pounds
ROIminus 300 ÷ 3,000minus 10%

A ROAS of 3 sounds healthy, and Karen's ads cost her three hundred pounds. ROAS has no sight of her costs. ROI does. Use ROAS to compare campaigns and set bidding targets, because Google reports it directly. Use ROI, or break-even ROAS below, to decide whether the ads pay.

What ROAS do you need to break even?

Your break-even ROAS is 100 divided by your margin percentage. It is the ROAS at which the profit on the work exactly covers the ad spend.

  • A 40% margin gives 100 ÷ 40 = 2.5.
  • A 30% margin gives 100 ÷ 30 = 3.33.
  • A 25% margin gives 100 ÷ 25 = 4.
  • A 50% margin gives 100 ÷ 50 = 2.

Margin here is the share of each job you keep after materials, wages, fuel and subcontractors. It leaves out the ad spend, which is what you are testing.

Karen's break-even is 3.33, so her ROAS of 3 sits below it. Priya's cleaning contracts might carry a 20% margin, which gives a break-even of 5. Her ROAS of 8 is well above it: she keeps one thousand six hundred pounds of profit on eight thousand pounds of revenue, so after the one thousand pounds of ads she is six hundred pounds ahead.

What is a good ROAS?

A good ROAS is one that sits well above your own break-even, because ad costs and your own costs both move. No single number suits every firm. Work out your break-even first, then decide how far above it you want to be. Our post on what a good ROAS is works through the targets for different margins. Our client value calculator gives you the break-even ROAS and a target from your own margin: Work out your break-even ROAS.

Where do you find ROAS in Google Ads?

Add a column once your conversions carry values. Google's help page on Target ROAS bidding, checked on 21 November 2026, says to select Modify columns from the Columns drop-down and add the Conv. value/cost column from the list of Conversions columns. Then, in its words, "multiply the conversion value per cost metric by 100 to get your Target ROAS percentage." A Conv. value/cost of 4 is a ROAS of 400%.

Leave out recent days when you read it. A quote accepted three weeks after the click is not in the figures yet, and Google's page says to ensure "the time frame of ROAS evaluation excludes the most recent conversion delay period".

Google also offers a Target ROAS bid setting. Its page says "Your Target ROAS is the average conversion value (for example, revenue) that you'd like to get for each pound that you spend on ads." It has a threshold for Search campaigns: "At least 15 conversions in the past 30 days at the conversion tracking level." A small local firm may not reach that yet, and a target based on cost per enquiry needs no conversion values. Our guide to cost per acquisition covers that approach.

Common questions

What does ROAS stand for in marketing?

ROAS stands for return on ad spend. It measures the revenue a campaign brings in for each pound spent on it, which lets you compare campaigns and keywords on the same footing.

Is ROAS the same as ROI?

No. ROAS divides revenue by ad spend, and ROI divides profit by ad spend. A campaign can have a ROAS of 3 and a negative ROI if the margin on the work is thin, as Karen's kitchen firm shows above.

Is ROAS calculated as a percentage?

It can be shown either way. As a ratio, a ROAS of 4 means four pounds back for each pound spent. As a percentage, the same result is 400%. Google's Target ROAS setting uses the percentage form.

Is a ROAS of 4 good?

It depends on your margin. A ROAS of 4 is exactly break-even for a firm with a 25% margin, comfortable at 50% and a loss at 20%. Divide 100 by your margin percentage to find your line.

What to do this week

Write down your average job value and your margin, then divide 100 by the margin to get your break-even ROAS. Check that each call and form in Google Ads carries a value, even an average one, and add the Conv. value/cost column to see your current figure. If it sits below break-even, our guide to optimising Google Ads covers the order to work in. To run the sums with your own numbers, work out your break-even ROAS in the client value calculator.